Product Profile of Cermet Pre-set

Cermet Pre-set is manufactured by the Pot-Tech Electronics [Bombay] Pvt. Ltd. And features with two different model numbers: P-6 and model P-8. Cermet Pre-set is offered by the Pot-Tech Electronics [Bombay] Pvt. Ltd in reasonable price. The salient features of the Cermet Pre-set are as follows:

• Cermet Resistor Track

• Infinite resolution

• Low Temperature Coefficient

• P.C. Board Stand Offs

• Better Stability over Wide Temp. Range

• Positive End Stops

• No Backlash

• Dust / Splash Proof Cover

• Wide Pin Configuration
Specifications of the Cermet Pre-Set model numbered P-8 are as follows: Resistance Range 100 to 1 Resistance Tolerance + 25% Resistance Curve Linear [Taper B] Power Ratting 0.5 Watt @ 40 °C Temperature Coefficient 200 PPM/ °C Contact Resistance Variation + 3% Maximum Working Voltage 250 V End Resistance 3 % Maximum of Resistance Value Angle of Rotation 260° + 20° Operating Torque 30 to 250 g.Cm Stopper Strength 350 g.Cm Operating Temperature Range - 30° to 80° C Life Expectancy 5% Change in Resistance After 200 Rot. Cycle Pin Configuration Horizontal: 5 x 10 mm Vertical: 5 x 2.5 mm The Specifications of the Cermet Pre-Set model numbered P-6 are as follows:
Resistance Range 100 to 1 Resistance Tolerance + 25% Resistance Curve Linear [Taper B] Power Ratting 0.5 Watt @ 40 °C Temperature Coefficient 200 PPM/ °C Contact Resistance Variation + 3% Maximum Working Voltage 100 V End Resistance 3 % Maximum of Resistance Value Angle of Rotation 200° + 20° Operating Torque 20 to 250 g.Cm Stopper Strength 300 g.Cm Operating Temperature Range - 30° to 80° C Life Expectancy 5% Change in Resistance After 200 Rot. Cycle Pin Configuration Horizontal: 5 x 2.5 mm or 5 x 5 mm Vertical: 5 x 2.5 mm