Product Profile of Surface Mounted Single Cell Battery Charger
Future Electronics Inc. Supplies Surface Mounted Single Cell Battery Charger. Future Electronics Inc. Is an ISO 9001: 2000 certified company. The Surface Mounted Single Cell Battery Charger is used to charge Li Ion Battery and is available with both linear and quasi-pulse operation.
Key Features of Surface Mounted Single Cell Battery Charger
- Reverse blocking diode
- Sense resistor and thermal protection
- Suitable for coke and graphite anode single-cell LI-ION packs
- Closed loop thermal control
- USB BUS-compatible
- Programmable charge current up to 1A
- Programmable pre-charge current
- Programmable end-of-charge current
- Programmable pre-charge voltage threshold
- Programmable charge timer
- Programmable output voltage at 4.1V and 4.2V, with &plusmin;1% output voltage accuracy
- [NTC] or [PTC] thermistor interface for battery temperature monitoring and protection
- Flexible charge process termination
- Status outputs to drive LEDs or to interface with a host processor.
- Configuration: Linear
- Number of Channels: 1
- Normally [Open/Closed]: NC
- Input Voltage Limit-Max: 12 V
- Input Voltage-Max: 16 V
- PDAs
- Handheld devices
- Cellular phones
- Digital cameras
- Standalone chargers
- USB-Powered chargers
