Product Profile of Ultra Isolation Transformer 2.5kva To 25kva

Ultra Isolation Transformer 2.5KVA to 25KVA, 9800 Series is offered by Aplab Limited. The company Aplab is an ISO 9001-2000 certified one. Ultra Isolation Transformer 2.5KVA to 25KVA is used as any line conditioning solutions. The Ultra Isolation Transformer 2.5KVA to 25KVA caters to wide array of applications and specifically recommended for human safety in hospital environment. The Ultra Isolation Transformer 2.5KVA to 25KVA has unique multiple shielding technique that is used to improve the noise leakage to one thousandth of an ordinary transformer and thereby providing total protection to the critical and sensitive load. The series Ultra Isolation Transformer 2.5KVA to 25KVA ranges from 2.5KVA to 25KVA. Ultra Isolation Transformer is used to eliminate line disturbances and preventing faulty and erratic operations in the computer. Ultra Isolation Transformer 2.5KVA to 25KVA is used in hospitals. Other systems essentially requiring Ultra Isolation Transformer 2.5KVA to 25KVA are digital communication systems, audio and video recording equipment. The salient features of the Ultra Isolation Transformer 2.5KVA to 25KVA:

• Filters Power Line Noise, Spikes and Transients.

• Isolates Sensitive Equipment from Noisy Power Lines.

• Complete Electrostatic Shielding.

• Minimizing Common Mode Noise by Over 110dB, Which is Impossible with Conventional Ordinary Isolation Transformers.

• Minimises Transverse Mode Noise.
Technical Specification of Ultra Isolation Transformer 2.5KVA to 25KVA:

• Input Voltage 115/230V nominal. Two windings in parallel or series [2.5KVA & 5KVA].230V nominal [7.5KVA and above]

• Acceptable Input Range plus minus 10 percent

• Output Voltage 230V AC.

• Mode of Operation 1:1 Isolation Transformer.

• Common Mode Noise Rejection [Transients, Spikes and Surges] Over 110dB

• Coupling Capacitance Less than 0.009pF

• DC Galvanic Isolation Over 100Mohms between any windings or windings to ground

• Breakdown Strength 2500V AC for 2 minutes acceptable

• Line Frequency 47 to 63Hz.

• Load Regulation plus minus 3 percent .

• Termination On terminal block / Brass studs of adequate rating.