Product Profile of DC Motor with Integrated Electronic Commutation
Ark Power Controls Private Limited offers DC Motor with Integrated Electronic Commutation. Ark Power Controls Private Limited supplies DC micromotors and motors, brushless micromotors and motors, stepper micromotors, hybrid and "tin can" technology stepper motors, digital linears actuators, spur and planetary gear boxes, optical or magnetic incremental encoders, intelligent servo - drivers for stepper and DC motors brushed or brushless. DC Motor with Integrated Electronic Commutation has 3.0 to 15.0 VDC voltage range. DC Motor with Integrated Electronic Commutation has the optional feature of dual shaft configuration. The motor has optional feature of speed signal 1 pulse per turn. It is available in the model no. Of 16BS2A.
Product Specification of DC Motor with Integrated Electronic Commutation
- Back-EMF constant:Coil dependent parameters(V/1000rpm): 2.45, 1.22, 1.02, 0.85, 0.65, 0.48, 0.32
- Electrical time constant:Intrinsic parameters: 0.04
- Max continuous current:Dynamic parameters(At 10 krpm): 0.13A, 0.27A, 0.33A, 0.36A, 0.52A, 0.68A, 1.00A
- Max. continuous power:Dynamic parameters(at 10 krpm): 6.2, 6.3, 6.3, 6.1, 6.4, 6.2, 6.1
- Max. continuous stall current:Dynamic parameters: 0.15A, 0.31A, 0.37A, 0.41A, 0.59A, 0.78A, 1.13A
- Max. continuous stall torque:Dynamic parameters: 2.7mNm, 2.8mNm, 2.8mNm, 2.5mNm, 2.8mNm, 2.8mNm, 2.7mNm
- Max. continuous torque:Dynamic parameters(At 10 krpm): 2.3mNm, 2.3mNm, 2.4mNm, 2.1mNm, 2.4mNm, 2.3mNm, 2.3mNm
- Mechanical time constant:Intrinsic parameters: 13.2, 13.0, 12.7, 15.0, 12.3, 12.9, 13.5
- Motor constant:Intrinsic parameters: 2.1mNm/W1/2, 2.2mNm/W1/2, 2.2mNm/W1/2, 2.0mNm/W1/2, 2.2mNm/W1/2, 2.2mNm/W1/2, 2.1mNm/W1/2
- No-load current:Dynamic parameters: 0.034A, 0.069A, 0.082A, 0.099A, 0.129A, 0.175A, 0.262A
- No-load speed:Dynamic parameters: 3200, 8200, 7200, 12200, 7700, 23400, 35800
- Phase/phase inductance:Coil dependent parameters: 4.80mH, 1.17mH, 0.80mH, 0.66mH, 0.32mH, 0.18mH, 0.08mH
- Phase/phase resistance:Coil dependent parameters: 120.0, 29.3, 20.1, 16.5, 7.8, 4.5, 2.1
- Rated Voltage:Dynamic parameters: 12.0, 12.0, 9.0, 12.0, 6.0, 12.0, 12.0
- Rotor inertia:Intrinsic parameters: 0.6Kgm2x 10-7
- Thermal Resistance:Intrinsic parameters: 26°C/W
- Torque constant:Coil dependent parameters (mNm/A): 22.40, 11.65, 9.74, 8.12, 6.21, 4.58, 3.06
- Winding Type:-A, -E, -H, -L, -P, -R, -T
