Product Profile of Uninterrupted Power Supply System
Neel Industrial Systems Pvt. Ltd. Offers Uninterrupted Power Supply System. Neel Industrial Systems Pvt. Ltd. Is an ISO 9001:2000 registered organization. The Uninterrupted Power Supply System is a device which is connected between main supply & critical load to provide clean, pure sine wave output without any interruptions during normal solutions and also during power outages.
Key Features of Uninterrupted Power Supply System
- Easily Up gradable: KVA Rating can be upgraded or down-graded by addition / deletion of modules.
- Computer Interface: Can communicate to the computer system in severe Power crisis & safely shut down systems without any human intervention. Remote control / Monitoring Power Quality & Data logging also possible [optional feature].
- Battery Modularity: Battery Back-up Time can be increased even at site.
- Programmable Battery Low: Advises level of Battery power available 5%, 25%, 50% or 75% of total Battery Capacity. This facility enables early warning of Battery discharge.
- Auto Start/Stop: Stops automatically if an internal fault occurs or battery is discharged, to protect battery.
- Failsafe Hybrid By pass switch: For transfer to mains & vice versa [as standard]. Reverts to inverter automatically when mains return.
- Separate By pass input Available: In case of mains & Inverter failure, the load will be transferred to auxiliary supply, which need not be mains supply, eg DG Set.
- Indications: UPS Status & near true RMS load Indicator.
- Dimensions: Substantially compact dimensions with smaller foot print occupying minimum floor space.
- Silent operation & aesthetic looks can be installed in the office premises, no separate room / enclosures required.
- Input Voltage: 175-265 V AC[Single Phase] 340-480 V AC[Three Phase]
- Input Frequency: 47-53 Hz
- Output Voltage: 220/230/240 V AC
- Output Frequency: 50 +/- 0.5 % Hz
- Dynamic Voltage Regulation: +/- 4 %[0-100% Load]
- Steady State Voltage Regulation: +/- 1 %
- Wave Form: Pure Sinewave
- Distortion: less than 3 % THD with any Single Harmonic less than 2 %
- Overload Capacity: 150 % for 25 Seconds
- Load Creast Factor: 1 : 3, at full load
- Efficiency: High...86 %
- Battery Autonomy [In Built]: 10 minutes full load, SMF Batteries
- 25 minutes half load
- By Pass Switch: Failsafe Hybrid Zero break
- RFI Suppression: To AS 1044
- Surge Protection: To IEEE587 A
- Audible Noise: Less than 55 db, @ 1m
- Ambient Conditions: 00 - 450 C and up to 90 % R. H.
- Controls Audible: Warning/mimic panel
- Software Compatibility: LAN, UNIX, XENIX, PRIME, UNISYS.
Product Specification of Uninterrupted Power Supply System
- Ambient Conditions:00 - 450 C and upto 90
- Audible Noise:< 55 (At 1m)
- Battery Autonomy:10 (Full load), 25 (Half load)
- Bypass Switch:Failsafe Hybrid Zero break
- Controls Audible:Warning, mimic panel
- Distortion:< 3 (THD), < 2 (Single harmonic)
- Dynamic Voltage Regulation:+/- 4 (0 - 100 % Load)
- Efficiency:High 86
- Input Frequency Range:47 - 53
- Input Voltage:175 - 265 (Single Phase), 340 - 480 (Three Phase)
- Load Crest Factor:1 : 3 (at full load)
- Output frequency: Inverter mode:50 +/- 0.5 %
- Output Voltage:220, 230, 240
- Overload Capacity:150 (for 25 S)
- Software Compatibility:LAN, UNIX, XENIX, PRIME, UNISYS