Product Profile of Insertion Turbine Flow Transmitter
Flowstar Instruments Pvt. Ltd. Offers Insertion Turbine Flow Transmitter. Flowstar Instruments Pvt. Ltd. Is an ISO 9001:2000 accredited company. Insertion Turbine Flow Transmitter is a 2 wire turbine flow transmitter which is specially used for various industrial applications. The flowing media of Insertion Turbine Flow Transmitter engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil of this transmitter senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsation electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to electrical signal 4 - 20 mA.
Key Features of Insertion Turbine Flow Transmitter
- 2 wire system.
- Simple & cost effective construction.
- Provides wide flow ranges.
- Local display as 8 x 1 LCD.
- Outstanding accuracy for clean & low viscosity applications.
- Operates over wide ranges of temperature & pressure.
- Flame-proof, lP-65, llA, llB CMRI Certified housing.
- Media: Liquids [Clear]
- Viscosity: 100 cp max
- Pick off Type: Magnetic sensor
- Line Size: 15 NB to 150 NB
- Display: 8 x 1 LCD
- Type of Output: 4 to 20 mA DC, 2 wire
Product Specification of Insertion Turbine Flow Transmitter
- Accuracy:+/- 1% F. S.
- Display:8 x 1 LCD
- Line Size:15 - 150 NB
- Linearity:+/- 1%
- Output Type:4 - 20 mA DC, 2 wire
- Pressure:Max 30
- Pressure Drop:Approx 0.28 kg/cm³ (at max flow)
- Repeatability:+/- 1%
- Temperature:Max 150
- Turn down Ratio:10:1 - 100:1
- Viscosity:Max 100 cp
- Operating Temperature:0 - 55
- Power Consumption:< 40 mW
- Power Supply:Loop powered, 24 V DC, External
- Response Time:< 100 mSec
- Temperature Coefficient:+/- 0.01% per °C
- Operating Humidity:5 - 95% non condensing
