Product Profile of Drop Infusion Pump

SS Technomed Pvt. Ltd. Manufactures Drop Infusion Pump. SS Technomed Pvt. Ltd. Is an ISO 9001-2000 certified company and is the manufacturer of medical equipment for indigenous medical institutes and practitioners. The Drop Infusion Pump features a level mechanism for protecting free flow in case of accidental door opening. The Drop Infusion Pump features Digital Processing of Drop Sensor Signal which helps in changing the infusion parameters without interrupting infusion. The Drop Infusion Pump comes with some salient features such as:

• Flow Rate & Volume Unit selection: Option to select Flow Rate Unit in terms of drop/mill or ml/hr & Volume Unit in terms of drops or m1.

• Adjustable air in line alarm threshold: The size of air bubble to be detected can be set in the range of 20 to 150micro1
Followings are the technical specifications of this Drop Infusion Pump:

• Infusion:

• Time range: 0 -99:00 hrs

• Overall Accuracy: +/- 1 percent

• Flow rate ranges: 0 -300 drops/min or 0 -300 ml/hr.

• Infusion volume limits: 0 -60000 drops or 0 -10000 ml

• Setting Modes: Flow rate only, flow rate + volume target, time + volume target

• KVO rate: 1 to 5 percent of selected infusion rate but min. 1 drop/ min or 1 ml/hr
Mechanical:

• Drop Sensor: External

• Pumping Mechanism: Linear Peristaltic

• Air Bubble Detector: Ultrasonic Adjustable 20- 150 micro 1

• Set type: 15, 20, 40, 60 drops/cc. Facility to add four customized sets as per user`s choice.
Indicators:

• Run and Mains.

• Alarms: No mains, Low battery, Very low battery, Low flow, Sensor error, High flow, Near End, Door open, KVO, End of infusion, Air in line, System error.
Power needed for this Drop Infusion Pump:

• Power Consumption: 12 Watts max.

• External power supply: AC Input range170 -270 VAC, Frequency 50 -60 Hz 12 Volts, l Amp DC output Supply

• Build in battery: 8.4 V, 2.1 AHr Ni -MH battery for increased durability.

• Battery life: Continuous operation for about 4.5 hrs. At an operating rate of 20 drops/mill or 20 ml/hr with assign I. V. Set under standard conditions.
Classifications of this Drop Infusion Pump:

• Class II, IPX1 [Drip Proof]

• Conditions: Temperature

• Operating: Ambient: 05 to 40deg C

• Atmospheric pressure: 70 to 106 kPa

• Relative Humidity: 20 to 90 percent [no condensation]
Housing and construction of this Drop Infusion Pump:

• Weight: Approx. 2.4 Kgs.

• Mounting: On a pole or bed-frame

• Compact and Robust A.B.S Plastic

• Dimensions: Approx. 250 [L], 245 [H], 90 [W]