Product Profile of Electric Discharge Sawing Machine
The Electric Discharge Sawing Machine can cut any electrically conductive material irrespective of its hardness. Electronica Machine Tools Ltd. Manufactures Electric Discharge Sawing Machine. Electronica Machine Tools Ltd. Is an ISO 9001:2000 certified company. In this machine there is sawing of spherical or slanting surfaces.
Key Features of Electric Discharge Sawing Machine
- It can cut any electrically conductive material irrespective of its hardness
- Sawing of spherical or slanting surfaces
- Faster than band saw in case of hard materials
- Minimum loss of material, as the cutting width is less than 1.5mm
- No deformation of work piece
- Good sawing efficiency irrespective of hardness & resistant strength
- Only small zone gets affected due to heat generation
- Very low running expenses
- Machine Tool: EDS200: EDS400: EDS600: EDS1000
- Maximum Cutting Limits
- [Cross-section of work piece]: 200mm X 200mm: 400mm X 400mm: 600mm X 600mm: 1400mm X 1000mm
- Work Table dimensions: 400mm X 600 Mm: 600mm X 800 mm: 800mm X 800 Mm: 1400mm X 1000mm
- Longitudinal travel [Y]: 600mm: 600mm: 600mm: NA
- Vertical saw travel [Z]: 250mm: 450mm: 650mm: 1150mm
- Rapid free rate: 600mm/min: 600mm/min: 600mm/min: 600mm/min
Product Specification of Electric Discharge Sawing Machine
- Axis Measurement Y & Z With Encoder:0.005
- Cutting Limits:Max. 200 x 200, 400 x 400, 600 x 600 (Cross-section of work piece)
- Cutting Saw Servo Feed:40 (working)
- Cutting Speed:10 - 15 cm²/ min (Average)
- Longitudinal Travel:600 (Y)
- Model No.:EDS200, EDS400, EDS400
- Net Weight:4500, 5000, 6000
- Rapid Free Rate:600
- Saw Speed:16 m/ sec
- Tension on Saw Belt:300
- Vertical Saw Travel:250, 450, 650 (Z)
- Work Table Dimensions:400 x 600, 600 x 800, 800 x 800
