Product Profile of Low Friction Hydraulic Pressure Pump Bearing
Advanced Materials & Tribology offers Low Friction Hydraulic Pressure Pump Bearing. Advanced Materials & Tribology supplies a wide range of Oil-less self-lubricated Bearings and Plates, Self Lubricating Bushes and Pump Bearings. Advanced Materials & Tribology is an ISO certified company. The Low Friction Hydraulic Pressure Pump Bearing is made according to the high PV value of hydraulic pump and is suitable for application in semi-dry condition. The Bearing is mainly applied to medium, high-pressure gear pump, ram pump, vane pumps, etc.
Key Features of Low Friction Hydraulic Pressure Pump Bearing
- Developed according to the high PV value of hydraulic pump
- Provides low friction coefficient
- Good anti-abrasion
- Suitable in semi-dry condition.
- Clean lubricating because of no lead
- Made according to the applied environmental condition.
- Maximum Static load capacity: 250 N/mm²
- Maximum Dynamic load capacity: 140 N/mm²
- Maximum Dry friction line speed v: 2 m/s
- Maximum Oil lubrication line speed v: 10 m/s
- Maximum Dry friction PV value: 3.8 N/mm².m/s
- Maximum Oil lubrication PV value: 60 N/mm².m/s
- Dry friction coef µ: 0.08 - 0.20
- Oil lubrication coef µ: 0.02 - 0.06
- Working temperature: -200° C - 280° C
- Thermal conductivity: 40 W/m . k
- Coefficient of linear expansion: 12 X 10&sup-6;/K
- Medium-pressure gear pump
- High-pressure gear pump
- Ram pump
- Vane pumps
