Prabha engineering products provides wide ranges of powder samplers in different categories and model ranges. The different types of powder samplers include
Pep-s-98-a model powder sampler- This pep-s-98-a powder sampler in standard single-sample design. This powder samplers are available in 22mm diameter. One unit-dose sample of the powder is obtained at each sample port. The bottom most port starts at 25mm from the tip. The company supplies 35 different sizes of split sample dies [0.1cc to 3.5 cc in increments of 0.1cc] and fit in this sampler. Stock sizes are 1ft with 4 ports, 2ft with 10 ports, 3ft with 6 ports, 4ft with 8 ports.
Pep-s-98-g model powder sampler- This pep-s-98-g powder sampler comes in tailor-made single-sample design. This powder sampler is useful for accommodating dies up to 200cc in volume. This pep-s-98-g powder sampler is available in 50 mm diameter. One sample is obtained at each sample port and the bottom port starts at 25 mm from the tip. The dies may be made of 316 stainless steel.
Pep-s-98-e model powder sampler- This pep-s-98-e powder sampler is a tailor-made spoon sampler with removable handle and interchangeable spoon-like sample die. The dies can be made to take any size sample. This pep-s-98-e powder sampler is suitable for sampling products where the particle surface cannot be disturbed, for example, coated non-pareils.
Pep-s-98-p model powder sampler- This pep-s-98-p powder sampler is a standard bulk powder sampler made of fda approved teflon. This sampler comes in 30 mm diameter and 1ft, 2ft, & 3ft length with three standard sample ports. This sampler is ideal for raw material sampling and can be used with or without dies.
Pep-s-34 model powder sampler- This pep-s-34 powder sampler is made from stainless steel in any size as per container or vessel height. The powder samplers are available in standard lengths of 2 ft, 2.5 ft, 3 ft & 3.5 ft. These samplers are useful in raw material & composite sampling.
Pep-s-60 model powder sampler- This pep-s-60 powder sampler is easy to dip in loaded drums. The inside outside mirror polish & nicely cut edges make it easy to clean. This powder sampler is easy to handle and the sampling object remains away from human touch removing any chances of contamination.