Plastic abhiyanta offers extremely good wear resistance coupled with high tensile strength and modulus of elasticity. It has qualities of impact resistance, high heat distortion temperature; resists wear abrasion, and vibration. In addition. Anulon-115 is impervious to a wide variety of chemicals, alkali dilutes, acids and oxidising agents. An important quality is its relatively lighter weight [approximately 1/8th the weight of bronze, 1/7th the weight of steel, and half the weight of aluminium], which reduces both inertial and static loads and eases handling of large components during maintenance or replacement procedures. It has balanced mechanical properties and its exceptional machinability makes it the ideal material for a wide range of applications. Anulon-115 oil grade is a highly crystalline modification of cast polyamide. It has been specially designed for sliding application through the addition of oil, solid lubricants and stabilizers. The lubricants and additives impregnated in the material provide continuous lubrication throughout the total lifetime of the component. Compared to the standard cast polyamide, a 50% reduction of the coefficient of sliding friction can be achieved. Availability: rounds, sheet, hollow sections, blocks, custom casting and non standard sizes on requirement.