Product Profile of Two Set Point Self Tune Pid Temperature Controller

Process Precision Instruments manufactures Two Set Point Self Tune PID Temperature Controller. Process Precision Instruments is an ISO 9001:2000 certified company.

The salient features of the Two Set Point Self Tune PID Temperature Controller are as follows:

• Dual Set Point, Single / Dual Row 4 Digit Display J / K, R / S, RTD Pt100 Input Versions

• Self Tune PID with Overshoot Inhibit Feature

• Programmable Heat / Cool Control Mode

• Sizes [mm]: 48[H] X 48[W] X 85[D], 72[H] X 72[W] X 65[D], 96[H] X 96[W] X 65[D]

Technical specifications of the Two Set Point Self Tune PID Temperature Controller are as follows:

• The Display user interface is 1 Row of 4 digits, 7 Segment High Intensity LED and 2 Rows of 4 digits, 7 Segment High Intensity LED, Upper Row: Process Value in Red and Lower Row: Set Point Value in Green; Keyboard - 3 / 4 Front Panel Keys

• Input type - Thermocouple J / K Version, Thermocouple R / S Version, RTD Pt100, 3 - Wire Version; Accuracy - ± 0.25% of reading, ± 1 LSD, ± 1degree C; Measuring Rate - 5 Samples per second [sampling time 200mS]; Corrections - Automatic, CJC for T / C, LRC for 3-wire Pt100.

• Outputs 1 - PID Control, Relay / SSR Versions; Relay: 10A/230VAC, Resistive Load: ; SSR Drive : 5VDC @ 40mA [non-isolated]; Output 2 - For Auxiliary Control / Alarm, Relay / SSR Versions, Relay: 10A/230VAC, Resistive Load: ; SSR Drive : 5VDC @ 40mA [non-isolated]

• Additional features include Control Action - PID [Proportional + Integral + Derivative] with Settable Direct [Cool] / Reverse [Heat] Mode; Tuning - X-PRESS Self-Tune Algorithm for Automatic Setting of Basic P, I, D Values; Overshoot Inhibit Feature - Provided with Enable / Disable & Settable Control Factor; Auxiliary Control [Output 2] - Programmable as On-Off Control with Settable Hysteresis, Blower Control with Settable Time Delay, Alarm with Settable Type [High/Low/Deviation]

• Supply Voltage - 85 to 264V AC, 50 / 60 Hz; Environmental - Operating 0 to 55°C, Storage -10 to 70°C, 5 to 95 %RH Non-condensing; Panel Sealing - Conforming to IP 65, NEMA 4X; Electromagnetic - Conforming to Generic Emissions standard EN50081-2 and general immunity requirements of EN50082-2 [95]; Safety Standard - Conforming to EN61010, installation category 2 [Voltage transients must not exceed 2.5 KV]; Dimensions [mm] - 48 [H] X 48 [W] X 85 [D], 72[H] X 72[W] X 65[D], 96[H] X 96[W] X 65[D]; Panel Cutout [mm] - 45 [H] X 45 [W], 68 [H] X 68 [W], 92 [H] X 92 [W]; Weight [Approx] - 300 grams