Unitech micro components offers mechanical roll feeders from retain industrial corporation, taiwan. It offers roll feeders to the indian press shops for retrofitting on presses using air feeds. Air feeds have a low investment cost and a very high cost of operation due to the high cost of compressed air, feeder servicing and the cost of bad parts. The mechanical feeder will have a slightly higher initial cost but has zero operation costs for many years and is the logical option for high volume stamping. This feeder has a pitch accuracy of 0.05 mm and can operate up to 600 stroke/min. Setting is quick and easy and a pilot release option is available. These feeders can be retrofitted on any mechanical press that has a power take-off shaft either in the front or the side of the press. The feeding can be left to right, right to left, or even front to back. A wide number of models can feed strips from 0-3.5 mm thickness, strip widths from 60-700 mm, and feed pitch from 50-300 mm.