Cenlub industries offers a range of lubrication products. Produces manual grease grease pumppump, model gp-15-6, which is a lubricating device meant for ejectingdriving out established amount of grease on each full stroke of handle. On pushing the handle of the manual grease pumppump, grease is ejected from the outlet of the pump under pressure. On pulling the handle, suction suction port of the cylinder gets is filled with the grease on pulling the handle. Spring pressure through follower plate appliedexerted over the top surface of the grease [filled in the reservoir] via follower plate further helps to push the grease in the suction port. The manual grease pump, model gp-15-6pump has possesses its own transparent acrylic reservoir for storage of grease. It has transparent acrylic reservoir. Grease can be filled into the the reservoir can be filled with grease either by opening top lid or through the filling port furnishedprovided at the side of the pump body. The manual grease pump, model gp-15-6pump has incorporates wall mounted constructionstructure. A non-return valve is fitted into the system at the outlet port to to check reverse flow of grease, a non return valve is put in the system at the outlet port. The manual grease pump has the following technical brief specifications: size l x w x h in mm - 165 x 140 x 365; outlet port size - ¼" bsp; model model - gp-15-6; reservoir capacity in kg - 1.5; discharge of grease per stroke in gm - 6; and maximum pressure if of grease in kg/cm² - 150;. Size l x w x h in mm - 165 x 140 x 365.
