Product Profile of Automatic Laser Cutting Machine
Scantech Laser Technology manufactures Automatic Laser Cutting Machine. Scantech Laser Technology is an ISO 9001: 2000 accredited company. The Automatic Laser Cutting Machine is a sheet cutter system with fully integrated hardware and software and peripherals incorporated. The Automatic Laser Cutting Machine is available with User Definable piercing cycles and
Polarizer.
Key Features of Automatic Laser Cutting Machine
- Auto cad: DXF, List File compatible
- Automatic Pierceing Control
- Step piercing,
- User Definable piercing cycles
- Power or Speed: Ramping Possible
- Scale: 10 - 100%
- Beam Delivery: Flying Optics.
- Cutting Head: Auto focus Capacitor Feed Back.
- Assist Gas Options: Oxygen, Nitrogen [Selection by Software]
- Centre dist. accuracy: &plusmin; 0.030 or better Between Objects RA values of edge finish.
- Wavelength: 10600nM
- Laser Power: 3000 Watt CW Max.
- Laser Beam Diameter: 18mm.
- Laser Beam Mode: TEM 01 + 00 Ring mode at full power
- Laser Beam Division: 1.3 mR or less H.A.D
- Laser Expansion: 1.8
- Mixing Ratio: Automatic; Built in
- Excitation: HF/HV Discharge
- Power Stability : &plusmin; 2% after 20 min warm
- Up time: 4 min max
- Power Consumption: 45 KW Max.
- Power Requirement: 3Ø, 420 V, 50 HZ
- Connected Load Cap: 100 Amp metered
- Weight: 2000 KG Max.
- Chiller: 6 Ft X 4 Ft X 5 Ft.
- Weight: 600 KG.
- Laser: 8` X 5`
- Air Utility Required: 16 Bar, 60 lpm
- Speed: Rapid Positioning 40m/min.
- Open Gantry: Sheet Can be loaded from Any 2 sides
- Beam Expander: 1.8 X
- Lens Heads : 5", 7"
