Product Profile of Tapping Machine with Heat Lather Cone
Anil Machines supplies Tapping Machine with Heat Lather Cone. Anil Machines supplies pillar drill machines; radial drill machines and auto feed drill machines. Tapping Machine with Heat Lather Cone provide specially treatment silicon liner cone. The head of Tapping Machine with Heat Lather Cone is made from close grained cast iron accurately bored, rimering and honed in perfect paralyze between the column and spindle. Its model no. Is TM-6.
Key Features of Tapping Machine with Heat Lather Cone
- Easy clamping device fitted for locking it on the column.
- Spindle is made from EN8 to withstand distortion it is lanced and mounted on roller bearings.
- The table is proportionately designed for rigidity and sufficient surface area is provided to hole down job.
- Tapping Machine Capacity: 6 mm.
- Drilling Capacity: 3 mm.
- Spindle Travel/Table travel [6 mm.]: 60 mm.
- Distance Spindle to Column: 80 mm.
Product Specification of Tapping Machine with Heat Lather Cone
- Diameter of column:47
- Distance Between Chuck to Base:190
- Distance between chuck to work table:movable
- Distance spindle/column:80 mm
- Drilling capacity:3 mm
- Forwards Speeds Range:480/750/1400
- Motor Single phase or three phase:0.25 H.P., 1440 R.P.M.
- No. of Spindle Speeds:3
- Overall front to back:540
- Overall Height:650
- Overall Width:270
- Reverse Speeds Range:480/750/1401
- Size of base Plate-L x B:370 x 250
- Size of Work Table-L x B:150 x 150
- Spindle Travel/Table travel (6 mm.):60
- Tapping Capacity:6
- V-Belt for Motor (Outside):A-36
- Weight:50 Kg.
