Product Profile of Tapping Machine with Clamping Device
Anil Machines manufactures Tapping Machine with Clamping Device. Anil Machines supplies pillar drill machines; radial drill machines and auto feed drill machines. Tapping Machine with Clamping Device is fitted for locking it on the column. The spindle of Tapping Machine with Clamping Device is made from EN8 to withstand distortion it is lanced and mounted on roller bearings. The model no. Of this machine is TM-12.
Key Features of Tapping Machine with Clamping Device
- Table is proportionately designed for rigidity and sufficient surface area is provided to hole down job.
- Table can be vertically powered or can be vertically powered or raised by worm and rack raised by worm rack [19mm].
- The slotting is provided to hold the heavy job.
- Overall Height: 1245 mm.
- Overall Width: 370 mm.
- Overall front to back: 600 mm.
- Weight approx: 120 Kg.
Product Specification of Tapping Machine with Clamping Device
- Diameter of column:74
- Distance Between Chuck to Base:450
- Overall Height:1245
- Overall Width:370
- Reverse Speeds Range:420/745/1315
- Size of base Plate-L x B:480 x 350
- Size of Work Table-L x B:190 x 220
- Spindle Travel/Table travel (6 mm.):75
- Tapping Capacity:12
- V-Belt (Inside):inside A-71
- V-Belt for Motor (Outside):A-25
- Weight:120 Kg
- Distance between chuck to work table:380 mm
- Distance spindle/column:140 mm
- Drilling capacity:8 mm
- Forwards Speeds Range:350/620/1100
- Motor Single phase or three phase:0.75/1 H.P., 1440 R.P.M.
- No. of Spindle Speeds:3
- Overall front to back:600
