Seven ranges in a single controller allows the controller to be used in a wide variety of applications. Maximum measurement range is 1000 ms/cm. Accuracy of -1% is achievable for most ranges, while -2% for measurements above 500 ms/cm.2-cell electrode system can be used with a selection of 0.01, 0.1, 1.0 or 10.0 cell constants.The cell constant corresponding to the cell connected to the controller can be input independently during calibration.
Status of the cell is updated and displayed after every calibration and can be viewed at anytime.Temperature coefficients can be set for more precise temperature compensation. Select from 0.0% to 10.0%.
In addition, for 0 to 2.000 µs/cm range, select `pure water` compensation graph to correct for the nonlinearity of pure water temperature correction curves.
Relative accuracy : + / - 1% of full scale reading [-2 % > 500 ms/cm]
Temperature range : -10.0 to + 125.0 °c [14.0 to 257.0 °f]
Resolution : 0.1 °c / °f
Relative accuracy : + / - 0.5 °c [- 1.0 °f]
Sensor : pt100 /pt1000 [jumper selectable]; 2 or 3 wire
Temperature compensation : auto / manual [normalized at 25 °c]
