Key Features of Digital Flow Indicator cum Totalizer Meter

• Input: 4 - 20mA or 0 to 10VDC or Pulse input.
• Display: Upper 6/8 Digits 0.5"/0.4" shows total Flow [Liter or m3 or Kilo]; Lower 4 Digit 0.4" shows Flow rate [LPM / LPH / m3/hr]. Individual discrete Red LEDs to indicate relay status.
• Memory: During power failure display is disabled and counter data are stored in permanent data storage memory without battery.
• Calibration: Field calibration for Zero and span, digital calibration by front key board.
• Key Board: Set, Digit shift, Increase, Enter and Cal keys for configuration, operation, programming and calibration. With the digit shift key individual digit can be directly changed, so data can be changed fast instead of normal increment/decrement keys.
• Output: For Flow Rate / Total flow with 1or 2 C/O Relay contact, 5A/230VAC or SSR or RS232/485 serial communication port for computer or for Printer, 4 to 20mA.
• Supply: 230/110 VAC + 10 %, 12V/24V DC
• Size & Case: ABS Molded Bezel. 96 X 96, cut out 92 X 92 Depth in 110mm.
• Mounting: Panel mounting, with two side clamps