Key Features of Wall Mounting And Pillar Mounting Jib Cranes

• The jib cranes with column have the main pillar fixed on the ground.
• The jib crane for the industry is used to serve workplaces and handle materials with medium/low weight.
• Normally up to 2000 kg.
• The hoisting is realized with an electrical rope or chain hoist.
• The transversal movements [through the jib arm and its rotation] are done manually by the operator; is possible install motors for the both movements.
• Salient features of JIB Crane at Wall
• These cranes are bounded to an existing structure [columns, pillars, walls, etc]. The operative characteristics are same of the jib cranes for industry.
• The cranes are developed and produced in the respect of the ISO 9001 norms [TUV].
• M. S. Gusset plates/thick base plate giving added rigidity to column.
• Base plate readily drilled to take six/eight holding down bolts.
• Jib arm fabricated from heavy section I beam for SMJC-1 and triangular truss construction or SMJC-2 & SMJC-3 type of jib cranes reduces deflection to acceptable limits.
• Bearings - Double roller self aligned type bearings with thrust & roller bearings to take care of horizontal and vertical loadings as well as radial thrust.
• Swivelling - Through chain at the end of the jib arm and / or hand cranking for easy manual swivel, alternately electrically operated swivelling for SMJC-3 type jib crane, on request.
• For positive full 360 degree rotation duly insulated brass swing springs with pantograph current collectors provided.
• Hoisting capacity: from 500 to 3000 Kg [jib crane for industry]; up to 40 metric ton [jib crane for ports].
• Crane Arm length: from 2 to 7 meters [standard]. Other dimensions are done on specific request.