Key Features of Power Build Geared Motors And Inline Gear Boxes

• Gear case: The reduction gear trains are housed in a sturdy gear case of one-place construction cast integral with its pedestal and internal partition wall which serves as both reinforcement and bearing housing. Gear case is manufactured from close grained cast iron and has ample surface area for heat dissipation.
• Gear and pinion: all gear components used are helical and manufactured from selected special alloy steel. Gears are generated on precise hobbing machines, heat treated and ground to achieve the best performance and efficiency.
• Output shafts: Output shafts of both geared motors and gear reducers and input shaft of inline gear reducers are manufactured from best quality medium carbon steel for high overhung load carrying capacities. For special applications, these shafts can also be heat treated.
• Lubrication: The lubrication of gears and bearings is fool-proof, being achieved automatically by splash of oil, Thus, no special care is required except occasional topping up of the oil to required level, A large oil filler-cum-breather, oil level indicator and drain plug are provide on the gear box.
• Electrical: Electric motor provided with geared motor is TEFC squirrel cage induction motor suitable for operation on 415V, 3-phase, 50 C/s AC supply as per IS: 325. All motors are provided in IP 55 enclosure and F/B class insulation. Geared motor fitted with electric motor of special design like flame-proof, crane duty, extended shaft on NDE, brake etc., can also be offered.