Product Profile of Double Column Cnc Vertical Turning Lathe Machine

Sarabsukh Enterprises manufactures Double Column CNC Vertical Turning Lathe Machine. Sarabsukh Enterprises is an ISO 9001:2000 certified company. The Double Column CNC Vertical Turning Lathe Machine is used for general purpose application of machining a variety of components in the various branches of industry. The distinguishing feature is diameter 1200 mm, with a maximum turning diameter of 1600 mm.

The main units of the machine are -

• The table is made of cost iron and of heavily ribbed construction for high machining speeds and is supported on a large phosphorus bronze guideways for taking vertical loads and stray tilting movements and adequately proportioned bed made of cast iron and of heavily ribbed construction. The table drives its rotation from a variable speed AC spindle motor through a gearing. The speed of the table is variable from 5-100 rpm.

• An adequate proportioned column made of cast iron has guide ways at the front and at the side rear to guide the cross rail effectively. The column is mounted on a bed.

• The cross rail is made of high grade cast iron, traverses vertically on the columns for providing the turning height for work piece. The cross rail is clamped at the desired position by manual clamps and is driven by a motor through gearing and lead screws.

• The cross rail carries a saddle on its front guide ways, which provides the horizontal [X axis], feed motion. The cross rail guide ways are hardened and ground. The saddle carries enclosed a square ram. The guiding surfaces of the ram are made of steel and are hardened and ground. The Turcite-B lining is employed for the saddle and ram sliding surfaces for superior frictional characteristics.

• The table bearing and the gears of the main drive transmission are lubricated by continuous circulation lubrication from a separate pump on the power pack. Automatic intermittent lubrication is provided for cross rail and ram guide ways as also for the bal screw nut.