Product Profile of High Density Polyethylene - HDPE Pipes
Sangir Plastics Pvt Ltd offers High Density Polyethylene - HDPE Pipes. Sangir Plastics Pvt Ltd is an ISO 9001:2000 and ISO 14001: 2004 accredited company. The Company also manufactures various types of PPH Pipes and Fittings, HDPE Pipes and Fittings, PVDF Pipes and Fittings, Hips and Flame Retardant Cores, Speciality Solutions, Profiles and Custom Fabricated Solutions, Welding Rods, Sheets etc. The High Density Polyethylene - HDPE Pipes are used in water supply systems, for effluents, chemicals and treated/untreated waste disposal, for de-watering, sand stowing and slurry transportation in mines, in systems for environmental protection, in agriculture etc. The High Density Polyethylene - HDPE Pipes are impact resistant with smooth internal wall. The High Density Polyethylene - HDPE Pipes are weather and wear resistant. These Pipes are non-conductive and chemical resistant having poor heat conductivity.
Key Features of High Density Polyethylene - HDPE Pipes
- Are Elastic Suitable
- Have highly suitable for welding
- Have homogeneous welded joints
- Are light in weight
- Are Prefabricated
Product Specification of High Density Polyethylene - HDPE Pipes
- Carbon content:2.25% (Black)
- Classification:10 MPa(MRS)
- Density:0.959
- Elongation:>350 % (Maximum)
- Flexural creep modulus:(4 point loading method, 1 min-value) : 1100 MPa
(4 point loading method, 24 h-value): 560 MPa
(4 point loading method, 2000 h-value): 330 MPa
- Flexural stress:21 MPa (3,5% deflection)
- Impact Strength:Charpy notched: 23 °c: 26 kJ/m2
Charpy notched: -30 °c: 13 kJ/m2
- Melt Flow Rate:(190°C/ 5.0 kg) : 0.23 g/10 min
(190°C/ 21.6kg): 6.4 g/10 min
- Odor treshold:< 2
- Shore Hardness:63 (3sec)
- Tensile Creep Modulus:1h: 850 [2.0] MPa
1000h: 360 [2.0] MPa
- Tensile Modulus:900 MPa(23°c, v = 1 mm/min, Secant)
- Tensile Strain:9%(23°c, v = 50 mm/min)
- Tensile Stress:23 MPa(23°c, v = 50 mm/min)
- Vicat softening temperature:74
