Grooved pins are parallel pins with three equi-spaced longitudinal grooves. They are rolled or pressed into the cylindrical body to deform the pin stock outward within controlled limits. When this pin is forced into drilled hole of proper diameter, a locking fit is obtained. Only a straight drilling hole is required and no reaming is needed. Grooved pins are manufactured from c-40 (en-8) material. They are supplied in soft condition and natural finish unless otherwise specified by the customer. Nazareths manufactures a range for grooved pins from 2 to 6 mm in diameter and 5 to 150 mm in length.These are available in different types like full length grooved pins (with pilot end) , full length grooved pins (with chamfer end) , 3 socket grooved pins (reverse taper) , locking grooved pins (third length center) , locking grooved pins (half length center) ,grooved taper pins (full length) ,half length grooved taper pins, round head grooved pins (rivet) , countersunk head grooved pins (rivet), grooved pins with under-cut (type a,b,c), clevis pins without head and many other.These are available in different sizes, standards, designs, quality etc. They are used by many industrial sectors.
