Prodek Lektronics P Ltd manufactures Microprocessor Single Phase Servo Stabilizer. Prodek Lektronics P Ltd offers different types of Voltage Stabilizers, Microprocessor Controlled Servo Voltage Stabilizer. Microprocessor Single Phase Servo Stabilizer is available with 4 K Bytes Flash Memory. The Microprocessor is programmed individually on a Personal Computer to give the best performance from each and every Single Phase Servo Stabilizer. The Microprocessor Controls the Output Voltage of the Single Phase Servo Stabilizer to 230 V +/- 1 %. Microprocessor Single Phase Servo Stabilizer has an electronic third eye which monitors the Output Voltage Independent of the Correction mechanism and shuts down the Single Phase Servo Stabilizer if the Input is below or above permissible limits thus fully protecting the valuable equipment connected to this Stabilizer. The Electronic Eye measures the Voltage every 1.78 Microseconds or 560,000 times every Second and if the Input or Output is above or below permissible Limits shuts down the Single Phase Servo Stabilizer in Eight Seconds. When the Input Voltage or Output Voltage of the Stabilizer is below or above permissible limits then the Microprocessor will shut down the Voltage Stabilizer and display an Error Message.
