Product Profile of Deepwell Hand Pumps With Water Chamber
Hrishi Exports Pvt Ltd supplies Deepwell Hand Pumps with Water Chamber. Hrishi Exports Pvt Ltd offers wide ranges of diesel engine. Deepwell Hand Pumps with Water Chamber is suitable for use in bore wells having static water level ranging from 12 to 45 metres.
Key Features of Deepwell Hand Pumps With Water Chamber
- Stroke Length: 125 ± 4mm.
- Discharge: 17 litres per minute of 40 strokes.
- Conversion Head: Side plate, back plate, front end top and bottom end plates are made from 4 mm thick MS plates. Bottom flange is made from 6 mm thick MS plates.
- Handle: Made from 32 mm Square MS bar. Length of Handle 1170 mm.
- Chain Assembly: 7 Pitch Chain assembly welded with M 12 Internal threaded coupler.
- Cover: Made from 2 mm CR Sheet.
- Top and bottom flanges are made from 6 mm thick Ms Plates. Pipe holder is made from solid bars to hold 32 mm Riser Pipes.
- Stand: The Stand flange is made from 6 mm thick MS Plate. The pipe used is 150 mm medium `B` Class pipe. The angles are 40 x 40 x 6 mm.
- Connecting Rod: 12 mm dia MS Bright rod in 3 meters length welded with coupler electro galvanised.
- Cylinder: 63.5 mm I.D. Cast-Iron cylinder with brass liner and cast iron caps of 32 mm thread with two nitrite rubber cup washer [leather] and Plunger rod as per IS 9301 - 1984.
- Riser Pipe: 32 mm nominal bore galvanized iron pipes of medium class.
Product Specification of Deepwell Hand Pumps With Water Chamber
- Discharge Valve:17 liters per minute of 40 strokes
- Conversion Head:Side plate, back plate, front end top and bottom end plates are made from 4 mm thick MS plates. Bottom flange is made from 6 mm thick MS plates.
- Handle bar:Made from 32 mm Square MS bar. Length of Handle 1170 mm.
- Chain Assembly:7 Pitch Chain assembly welded with M 12 Internal threaded coupler.
- Water Chamber:Top and bottom flanges are made from 6 mm thick Ms plates. Pipe holder is made from solid bars to hold 32 mm Riser Pipes.
- Stand:The Stand flange is made from 6 mm thick MS Plate. The pipe used is 150 mm medium B Class pipe. The angles are 40 x 40 x 6 mm.
- Connecting Rod:12 mm dia MS Bright rod in 3 meters length welded with coupler electrogalvanised.
- Cylinder:63.5 mm I.D. Cast-Iron cylinder with brass liner and cast iron caps of 32 mm thread with two nitrile rubber cup washer (leather) and Plunger rod as per IS 9301 - 1984.
- Riser Pipe:32 mm nominal bore galvanized iron pipes of medium class.
- Stroke Length:125 ± 4mm.