Product Profile of Standstill And Rotational Direction Monitor
Standstill and Rotational Direction Monitor is a one-channel signal conditioner and requires 24 V DC supply for operation. The Monitor is designed with line fault detection facility and ensures two relay contact outputs. The Monitor is configurable by keypad and ensures two relay contact outputs. Standstill and Rotational Direction Monitor is available in application specific design and is accurate in dimension.
Specifications of Standstill and Rotational Direction Monitor:
- One-channel signal conditioner.
- PNP/push-pull, dry contacts or NAMUR inputs.
- Selectable frequency trip values.
- Two relay contact outputs.
- Selectable mode of operation.
- Up to SIL2 acc. To IEC 61508.
Product Specification of Standstill And Rotational Direction Monitor
- Ambient Temperature:-10 ... 50 ° C
Storage temperature : -40 ... 85 ° C (-40 ... 185 ° F)
- Connections:terminal compartment, = 2.5 mm2
conductor csa
- Indicators:LED green : Power on
LED yellow : switch output 1
switch output 2
LED red : fault (due to external noise or incorrect adjustment)
DIP-switch : S9 = ON/NO
S9 = OFF / NC
S10 = ON/Window operation (barrier mode)
S10 = OF/independent switch points
- Materials:Housing : PBT
Transducer : epoxy resin/hollow glass sphere mixture; polyurethane foam
- Working Voltage:20 ... 30 V DC , ripple 10 %SS
- Output:Output type : 2 switch outputs pnp, NO/NC
Rated operational current : 200 mA , short-circuit/overload protected
Voltage drop : ≥ 3 V DC
Repeat accuracy : ≥ 1 %
Switching frequency : ≥ 5 Hz
Range hysteresis : ≥ 5 % of the set operating distance
Temperature influence : ≥ 0.17 % / K
- Protection:IP65
- Range:200 ... 1000 mm
- Weight:338 g