Product Profile of Frequency Converter With Line Fault Detection Facility
Frequency Converter with Line Fault Detection Facility is a one-channel signal conditioner and requires 24 V DC supply for operation. The Frequency Converter ensures input frequency of 1 mHz to 12 kHz and current output 0/4 mA to 20 mA. The Frequency Converter ensures ambient temperature of -20 to 60 degree C. Frequency Converter with Line Fault Detection Facility is designed with IP20 degree protection.
Frequency Converter with Line Fault Detection Facility has the following features:
- One-channel signal conditioner.
- 24 V DC supply [Power Rail].
- Dry contact or NAMUR inputs.
- Input frequency 1 mHz to 12 kHz.
- Current output 0/4 mA to 20 mA.
- Relay and transistor output.
- Up to SIL2 acc. To IEC 61508.
Product Specification of Frequency Converter With Line Fault Detection Facility
- Type:Digital output
- Ambient Temperature:-20 ... 60 ° C (-4 ... 140 ° F)
- Connections:Power Rail or terminals 14+, 15-
- Dimensions:20 x 119 x 115 mm (0.8 x 4.7 x 4.5 in) ,
housing type B2
- Input:Connection : terminals 7+, 8+, 9+, 10+, 15-
Input current : approx. 2 mA at 24 V DC
Signal level : 0-signal: 0 ... 5 V DC
- Output:Internal resistor : 0 ohm
Open circuit voltage : 24 V DC
Connection terminals : 1+, 2+, 3+, 4+, 5-, 6-
Switching frequency : 1 kHz
Output rated operating current : 600 mA
Output signal : 0 ... 600 mA (operating voltage - 0.2 V)
- Degree of Protection:IP20
- Rated Voltage:20 ... 30 V DC
- Weight:approx. 100 g
