Pantech Instruments manufactures Universal Input Signal Isolator and Convertor, model 821U. Pantech Instruments is the manufacturer and exporters of Process Control Instruments. The Universal Input Signal Isolator and Convertor is an instrument for providing isolation between input, multiple outputs and power supply. The module is a choice when fanning out of process signal is required. Universal Input Signal Isolator and Convertor provides up to maximum 4 output signals, each capable of driving of 800 ohms. All these outputs are isolated from each other, input and power supply. This ensures isolation between various subsystems in the Universal Input Signal Isolator and Convertor and protects the system from all grounding problems.
The isolators are designed such as to accept Universal type of inputs. The high end programmed microcontroller allows the user to configure all the parameters of the instrument. All the calibrations, fine tuning of the output in the Universal Input Signal Isolator and Convertor can be done without opening the instrument. The design of the Universal Input Signal Isolator and Convertor requires only one single positive barrier at the input from a two-wire transmitter for intrinsic safety and isolates the control room. The cold junction compensation is built in and up scale burn out is provided as standard features for thermocouple input ranges. Universal Input Signal Isolator and Convertor is equipped with a mandatory display of resolution 4 digit. All the settings, configurations can be done with the help of 4 keys on the front.
