Oswal Industries Ltd. Manufactures Body Mounted Disc Swing Type Check Valve. Oswal Industries Ltd. Is an ISO 9001:2000 accredited company. Body Mounted Disc Swing Type Check Valve is heavy duty, bolted cover, renewable seat ring valve. Body Mounted Disc Swing Type Check Valve is straight through flow which works automatically. These valves are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions. Swing Check valves are suitable for moderate velocity operations. These valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact. The most advanced design of these valves is provided with the features which provide the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation. Swing Check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.
