www.jimtrade.com
Menu

Ku-Ht Version Swing Gate Valve

Ku-Ht Version Swing Gate Valve

Product Category :    Gate Valves

Supplier                :    Jash Engineering Ltd

Key Features of KU-HT Version Swing Gate Valve

  • Metal to Metal to Metal face sealing for material tight shutoff across the gate.
  • The top housing is provided with a baffle at the inlet to guide the flow of material towards the centre and not towards the peripheral sealing fitted in the top housing.
  • Gate having beveled knife-edge at bottom to cut through standing columns.


Inquire Now
Product Profile of KU-HT Version Swing Gate Valve

Jash Engineering Ltd manufactures KU-HT version Swing gate valve. Jash Engineering Ltd is an ISO 9001:2000 certified company. KU-HT version Swing gate valve widely used in waste water industry is a metal seated valve suitable for high temperature up to 900 Degree C specially designed for bed ash discharge where generally manual plate valves are used.

Key Features of KU-HT Version Swing Gate Valve
  • Metal to Metal to Metal face sealing for material tight shutoff across the gate.
  • The top housing is provided with a baffle at the inlet to guide the flow of material towards the centre and not towards the peripheral sealing fitted in the top housing.
  • Gate having beveled knife-edge at bottom to cut through standing columns.
  • The bottom housing is provided with tapering surfaces to enable material to slide towards the outlet and eliminate the possibility of material retention.
  • The swinging movement of the gate is performed by actuation of lever through 60-70°. This enables effortless open and close operation of valve in few seconds.
  • The gate does not come out of the housing unlike a slide gate valve. A axle is welded to the gate and the axle operates in a bearing box packed with o-rings so as to make the valve leak tight to the environment.
  • The metallic seal is fitted in a groove provided in the top housing. This sealing remains out of the material flow thereby greatly reducing the possibilities of wear.
  • The adjustable supporting bolts/supporting ring provides full support to the bottom of the gate in valve closed position.
  • Purging holes provided on top housing enables remove material retention, if any, inside the valve.
  • Manual
  • Electro pneumatic
  • Geared motor
  • Size: DN 80, DN 100, 150, 200, 250, 300, 350 & 400.
  • Mounting holes drilled to suit flanges as per DIN PN10 & ANSI 150# B16.5
Recently Updated Products



Forged Steel Gate Valve
Forged Steel Gate Valve
Supplier    :    Ananta International
Inquire Now
Metal Made Gate Valve
Metal Made Gate Valve
Supplier    :    Autocap Industries
Inquire Now
Gate Valve And Component
Gate Valve And Component
Supplier    :    Balaji Super Alloys
Inquire Now
Fluid Handling Purpose Slide Gate Valve
Fluid Handling Purpose Slide Gate Valve
Supplier    :    Adroitt Flow Control Private Limited
Inquire Now
Metal Made Gate Valve
Metal Made Gate Valve
Supplier    :    Anugraha Valve Castings Ltd
Inquire Now