Product Profile of High Tension Load Break Switch Panel
Intrans Electro Components Pvt. Ltd manufactures High Tension Load Break Switch Panel. Intrans Electro Components Pvt. Ltd is an ISO 9001: 2000 certified company offering a wide range of Cast Resin Transformers, Unitised Sub Stations, Load Break switch Metering Panels, Potential Transformers and epoxy moulded components. The High Tension Load Break Switch Panel is suitable for indoor application and is used to switch On/Off the 11 KV supply. The High Tension Load Break Switch Panel works on the principle of extinguishing the Arc by a blast of compressed air, produced by the switch itself, while opening.
Key Features of High Tension Load Break Switch Panel
- The Air Break Switch is provided with HT Fuse and earthing facility.
- The panel is designed to segregate completely incoming and outgoing termination chambers with Epoxy resin cast seal off bushings.
- The HRC fuses are easily withdrawable type so that fuses can be renewed easily.
- When the fuse switch operates on fault, the mechanism would give simultaneous break on all three phases and also would go into lock position to prevent closure until the blown fuses are replaced. T
- The bus bars will be 630 Amps rating, aluminium or electrolytic copper, tinned, supported by epoxy insulators.
- Cable gland plate is provided at the top/bottom of the panel for entry/exit as required.
- Electronic Meter with TOD [Time-of-Day] metering facility
Product Specification of High Tension Load Break Switch Panel
- Insulation Level:28/ 75
- Rated Short Time Current:26.3 KA 1 Sec
- Switch Rating:Load Break: 12 KV 630 Amps Rating.
- System Voltage:12
