Product Profile of Mechanical Tool For Cutting & Removal Of Sg Tube And Plugging
Integrated Drive Systems Pvt. Ltd. Supplies Mechanical Tool for Cutting & Removal of SG Tube and Plugging. Integrated Drive Systems Pvt. Ltd. Offers diverse range of automation motion control systems and multi-axis manipulators.
The Mechanical Tool for Cutting & Removal of SG Tube and Plugging consists of:
- SG Plug Removal Tool: SG plug removal tool is basically used for removing weld around the incoloy plug, which is used to plug leaky / defective tube by seal welding on tube sheet side.
- SG Tube Cutting Tool: SG tube cutting m/c is used for cutting the steam generator tube internally at a distance of 1.5 to 2 meters axially from the 400-mm thick tube sheet. Two H.S.S. Tool Bits are used for cutting the tube internally. The height at which the tube is to be cut can be reached by joining the extension pieces of feeding rod and rotating pipes.
- SG Tube Removal Tools: The tube that is already cut with the help of tube cutting tool can be removed by SG tube removal tool. A special tube removal tool made up of case hardened steel AISI 8620 having buttress taper left hand thread is inserted inside the tube`s rolled portion and then pulled out with the help of nut.
