Product Profile of Light Duty Rubber Made Water Suction Hose
Indo Rub Industries supplies Light Duty Rubber made Water Suction Hose. Indo Rub Industries is an ISO 9001: 2000 certified company. The Light Duty Rubber made Water Suction Hose is used in irrigation, dam, agriculture, industries, construction sites and for dewatering of pits and mines. The Hose is available with Corrugated, wrap finish, abrasion and weather resistant outer cover.
Key Features of Light Duty Rubber Made Water Suction Hose
- Smooth and seamless
- Uniform in thickness tube.
- Reinforcement: Textile reinforcement impregnated with rubber and with embedded wire helix.
- Temperature Range: -40°F to +160°F.
- Length: Maximum 18 Metres to 75 mm. and minimum 7.5 Metres to 150 mm.
- Nominal bore: 31.5mm, 38.0mm, 50.0mm, 56.0mm, 63.0mm, 75.0mm, 100.0mm, 125.0mm and 150.0mm.
- Tolerance on Nominal bore: 1.50mm and 2.00mm.
- Thickness of Lining: 1.50mm, 2.00mm and 2.50mm.
- Thickness of Cover: 1.00mm and 1.50mm.
- Number of Reinforcement plies: 03, 04 and 05.
- Working Pressure: 2.00 PSI, 1.50 PSI and 1.00 PSI
- Thickness of Wire: 2.00mm, 2.50mm, 3.15mm and 4.00mm
Product Specification of Light Duty Rubber Made Water Suction Hose
- Cover:Corrugated, wrap finish, abrasion & weather resistant outer cover.
- Reinforcement:Textile reinforcement impregnated with rubber with embedded wire helix.
- Temperature Range:-40°f to +160°f.
- Tube:Smooth, seamless, uniform in thickness tube.
- Length:Max 18 Mtrs. upto 75 mm., 7.5 Mtrs. upto 150 mm.
- Total Stroke:31.5, 38.0, 50.0, 56.0, 63..0, 75.0, 100.0, 125.0, 150.0
- Tolerance on Nominal bore:1.50, 1.50, 1.50, 1.50, 1.50, 2.00, 2.00, 2.00, 2.00
- Minimum thickness of lining:1.50, 1.50, 1.50, 2.00, 2.00, 2.50, 2.50, 2.50, 2.50
- Minimum thickness of covers:1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.50 1.50, 1.50
- Number of reinforcement Ply:03, 03, 03, 04, 04, 04, 05, 05, 05
