Product Profile of D. C. Stepping Motor
Gravity Engineering manufactures D.C. Stepping Motor. Gravity Engineering manufactures Miniature Synchronous AC/DC Gear Motors. The D.C. Stepping Motor is an electromagnetic device, which converts digital pulses into discrete mechanical rotational movements. The motors are hybrid type uni-polar or bipolar having multi- toothed rotor & stator. The rotor uses permanent magnet & the stator is two phase pair [four phase] bifilar winding, with 6 leads or 8 leads.
Special features of D.C. Stepping Motor:
- A wide range of rotating speeds [stepping rate] proportional to the frequency of the pulse signal is provided
- The rotating angle of the motor is directly proportional to the number of input pulses
- The angle error per step is very small & non-cumulative
- Rapid response to starting / stopping & reversing
- Digital input pulse signal provide open-loop control, thus making the system simple & avoiding the need for closed loop system for less critical application
- Self-holding capability makes it possible for the rotor to be held in the stepped position without the use of brakes
General Specifications:
- Step Angles : 1.8 ° full step; 0.9 ° half step
- Angular Accuracy : ± 5% non-cumulative [No load]
- Switching Sequence : 4 step [Full step]; 8 step [Half step]
- Stator winding : Bifiliar, 6 leads or optional 8 leads
- Operating Temp : -10 ° C to 50 ° C
- Insulation Class: Class B
- Insulation Resistance : 100 M? minimum at 500 V.D.C
- Dielectric Strength: 500V A.C. For 1 Minute
- Holding Torque: 2 to 60 kg-cm in 12 models
- Frame size [O.D.]: 58 mm, 86 mm & 108 mm
