Product Profile of Spm Hawsers

Garware-wall ropes ltd manufactures and supplies all types of spm hawsers. These are made from nylon or maxiflex. The company offers 8 strand ropes up to 15" circ and double braided ropes of all sizes. These are manufactured as per ocimf guidelines and exported to europe and south east asia. These are also well tested before dispatch. They come with following salient features:

• Pe braided netting with copper and steel wire to reduce algae growth and protection from predators

• The length of the hawser assembly will be maintained as required.

• The ropes will be manufactured, inspected and tested in accordance with ocimf guidelines 2000 - first edition.

• The new dry breaking strength of the rope would be verified by third party surveyor i.E. Lloyd`s register asia.

• For double leg grommet assembly, the calculated assembly strength will be 1.7 times of the new dry breaking strength of the rope.

• The tcll [thousand cycle load level] value as determined by prototype cyclic load procedure described in ocimf will be 75.63 % of nwbs [new wet breaking strength] for maxiflex ropes and 50 % for nylon ropes.

• The material of the rope will be composite fiber i.E. Mix of polyester and polypropylene for maxiflex and 100 % nylon for nylon ropes.

• For double leg systems the legs will be tied / seized together at minimum 7 places for a length of 1.2 m each
.

• For double leg grommet, each leg will have an end for end splice in the center thus balancing the total assembly.

• The rope will form soft eyes at each end. The ends will have a polyurethane encapsulated cast steel thimble is 1030: 1998 gr. 230 - 450 w grade

• The soft eyes of the ropes at the end can also be provided with reusable model bollard k - 400 grade and bell mouth thimbles is 2062 grade

• The thimbles and monel blocks are ultrasonically tested. The thimbles are hot dip galvanized to suit marine conditions.

• Rope legs inside the bell mouth thimble will be covered with polyurethane coated polyester fabric for chafe protection.

• In case of cast steel thimble, pu encapsulation shall be provided inside the thimble to prevent chafing.

• Additional optional protection such as pu cloth protection / leather covering / rubber sleeve can be provided as per customer`s desire

• Lace on type pocket hawser floats will be provided over the length of the hawser at regular intervals so as to have at least 20 % reserve buoyancy to support the rope in sea.

• For double leg systems a double collar float will be provided over the spliced portion of the rope.