Hy -power clamps pvt ltd presents the oil intensifier. This is used to boost the lost pressure output of a hydraulic per unit. The high pressure output of the intensifier is mainly used for clamping cylinders and work supports. Like the hydro pneumatic double acting intensifier the oil intensifier works on the same principle..The power source is low pressure oil instead of pneumatic power. Oil intensifier gives high pressure output without the oil-heating problem. It uses low pressure oil as the power source and achieves intensification by static pressure conversion. Two models are offered with intensification ratios 4 and 6. If the oil output of an intensifier is sufficient for clamping-elements, cylinders can be connected directly to the intensifier. If the oil, requirement of clamping- elements is more than the output of an intensifier; then the prefill circuit can be used. By removing the make-up oil bottle, the same port is used for prefilling. Leakage compensation is made either by make-up oil bottle, or through pre-fill circuit.
