Product Profile of Industrial Radiant Boilers [single Drum Design]

Thermax Babcock & Wilcox Limited brings Industrial Single Drum Design Radiant Boilers. The Industrial Single Drum Design Radiant Boilers provide solutions to the various limitations created by a Bi-Drum boiler in high-pressure applications. The Industrial Single Drum Design Radiant Boilers ensure good reliability. The Industrial Single Drum Design Radiant Boilers are suitable for applications in Fertiliser plants, Power plants, Chemical and Petrochemical plants and Refineries where quick starts, stops and load chasing are required. The Industrial Single Drum Design Radiant Boilers can be used for higher operating pressures. The custom made Industrial Single Drum Design Radiant Boilers have been manufactured to render optimum solutions for Co-generation and Captive Power systems. These Single Drum Design Radiant Boilers are utilized to fire various fuels like Gas, Heavy and Light Oil, Pitch, Coal and Agro-waste. The Industrial Single Drum Design Radiant Boilers provide the following facilities:

• Design pressures upto 135 kg/cm2 [2275 PSI]

• Steam temperatures upto 540degC [1005degF]

• Capacities from 80 TPH [175 LBPH] to 500 TPH [660 LBPH]
Some salient features of these Single Drum Design Radiant Boilers are as follows:

• Fully automatic controls.

• Low sound level equipment.

• Fully convective superheater.

• Drum located outside gas path.

• Steam cooled superheater supports.

• Horizontal fully drainable superheater.

• Wide range of gaseous and liquid fuels.

• Water cooled membrane wall boiler block.

• Bottom supported membrane walled design.

• Design pressures upto 160 kg/cm2 [2275 PSI].

• Steam temperatures upto 540degC [1005degF].

• Fully drainable horizontal superheater for long life.

• Large furnace size and volume, hence reduced emissions.

• Steam cooled superheater supports for increased reliability.

• Furnace dimensions designed to meet specific requirements.

• Front wall firing of a wide range of Liquid and gaseous fuels.

• Fully welded construction hence leakproof on water/steam as well as gas side.

• Steam drum outside the flue gas path hence permits quick startup, load chasing.

• Steam generating capacity from 80 TPH [175 LBPH] to 500 TPH [660 LBPH].

• No Boiler Bank, hence reduced drum thickness, reduced capital cost, reduced construction and maintenance costs and higher operational reliability.