Product Profile of Full Height Single And Double Lane Turnstiles
Shalom Enterprises supplies Full Height Single and Double Lane Turnstiles. Shalom Enterprises is an ISO 9001:2000 company. Full Height Single and Double Lane Turnstiles are used when absolute entrance or exit security is required, especially in unguarded locations.
Key Features of Full Height Single And Double Lane Turnstiles
- The locking and unlocking of the turnstile is accomplished by use of a low voltage, 24V DC, System, activation is by a momentary, isolated normally open dry contact closure.
- Electrical controls are available in both entrance and exit directions. Controls may be fail-safe, fail-lock or any combination, in either controlled direction. If free passage is required, no electrical controls are provided.
- All fail-lock applications include a mechanical key release which will allow free passage in case of an emergency.
- Throughput: 12 to 15 persons per minute with access control.
- Rotor Arm height from Ground: + 840 mm 120 deg. stop [Tri arm]
- Positive action lock is provided to prevent multiple person`s access or exit.
- Anti-back up device to prevent reverse rotation after 25deg.
- The cabinet is made of heavy gauge mild steel with epoxy powder coated finish or stainless steel to ensure long trouble free
- Operating life and requiring minimal maintenance.
- A Self-centred mechanism with hydraulic damping to ensure complete rotation of the tripod head to reset position.
- Temperature Range: 5-55 degree Centigrade.
- Turnstile is certified by an authorized certification.
- Ingress protection shall be of at least IP54/NEM3, is rugged and Industrial type.
- Direction of entry: Bi-directional / Unidirectional [Controlled and free rotation].
- This is compatible to any access-exit control/ attendance/pay roll system/ device.
- It has side hand rail to prevent forced side entry of persons.
