Product Profile of Copper And Copper Alloy Fin Tubes
Mehta Tubes Ltd. Is engaged in manufacturing of Copper and Copper Alloy Fin Tubes. The Mehta Tubes Ltd. Is an ISO 9001:2000 Certified Company. The Copper and Copper Alloy Fin Tubes in comparison to plain tubes increase the surface area of the tube and improve the heat transfer efficiency. The Copper and Copper Alloy Fin Tubes are available in various models:
Met - Gem Fined Tubes Type 1.
- Shell & Tube is an integral extended surface tube having helical fins [19, 26, and 40 on the outside & designed primarily for Shell & Tube Heat exchanger application, to increase efficiency & reduce cost.
- Duplex Type Shell & Tube Trufin: This is available in a variety of combinations like [Copper finned tube over a steel liner, Admiralty finned tube over cupro-nickel liner, Aluminum finned tube over an Admiralty liner etc.
Met - Gem Fined Tubes Type 2
- Shell & Tube Turbo-Chill: Is an integral extended surface tube having helical fins [19, 26, and 40] on the outside & integral helical ridges on the inside to improve turbulation, thus giving more balance outside to inside coefficient ratio & designed for shell & tube heat exchanger application such as boiling & condensing of hydrocarbons.
Met - Gem Fined Tubes Type 3
- Helical Fins Trufin : Is an integral extended surface tube having helical fins on the outside & designed primarily for application, which require a high outside to inside surface area ratio such as heating or cooling gases.
Met - Gem Type Fined Tubes 4
- Liner Tube Trufin: Is a bimetallic extended surface tube with high integral fins, for light weight & economy, finned on prime surface or liner tube chosen for resistance to a specific corrosion environment. It has a high outside to inside surface area ratio for heating or cooling gases. Liner tube Turfin is available in any combinations & in four types spirally wounded fin tubes; Plain type, Crimped type, `L` type and Wire wounded.
Specifications of Copper and Copper Alloy Fin Tubes are:
- No. Of starts: Triple start
- No. Of fins/ inch: 19 and 26
- Placement of fins: OD or ID or OD + ID
- Diameter: 19.05mm and 15.77mm
- Wall: 16SWG, 17SWG, 17.5SWG & 18SWG
