Synco Industries Limited offers Thermal Spraying Powder Jet Gun. Synco Industries Limited is an ISO 9001:2000 registered organisation. The Thermal Spraying Powder Jet Gun is used to deposit metals, ceramics or cermets available in powder form on to solid work surfaces. The powder to be sprayed is fed by gravity through a metering valve and is drawn at a reduced pressure into an Aspirator chamber. The powder is then propelled through an oxy-acetylene flame. The flame melts the powder and propels the fine molten metal particles towards the work surface to be deposited there in the form of a coating. The gun has several merits. As only a minute amount of the powder is lost by being blown away or consumed in the flame, the deposit efficiencies are very high, nearly 100% in some cases. Sprayed coatings are dense and uniform. The Thermal Spraying Powder Jet Gun can be operated both manually as well as held in a tool post for large volume automatic production. The design of the gun is such that it can spray a wide variety of powders without changing nozzle. The Thermal Spraying Powder Jet Gun will perform efficiently and economically for a long time if the simple instructions regarding the operation and maintenance are followed.
