Product Profile of Pvc Braided Hose Pipe Plant With Pipe Cutter
Spark Engineering manufactures PVC Braided Hose Pipe Plant with Pipe Cutter. Spark Engineering offers wide ranges of pipe and profile plant, Sheet Plant, granulation plant, Non Toxic Tubing Plant, High Speed Mixer, and PVC braided hose pipe plant etc. PVC Braided Hose Pipe Plant with Pipe Cutter, comes in various models, available with control panel which comprises of Microprocessor based Digital Temperature controllers to control the temperature on barrel and die. All DC motors are driven by thyristorised DC drive to get the better speed control. Main AC motor gets the optimum performance of the machine.
This PVC Braided Hose Pipe Plant is available with:
- Extruder: This contains Screw and Barrel both are made from alloy steel duly nitride and hard chrome plated for long life. Screw is fitted on suitable heavy thrust housing with thrust and roller bearing to withstand thrust pressure during extrusion. Screw is driven by AC motor and coupled through a suitable standard make gear box. Barrel is divided into three zones for heating load distribution. Cooling blowers are provided on the barrel for two zones. Water circulating jacket is provided in feeding zone.
- Die: Die and adapter is made out from an alloy steel and hard chrome plated
- Vacuum sizing chamber with cooling tank: This unit is fabricated from the SS sheet. Suitable size of vacuum pump and two sizers are fitted to maintain accurate size of the pipe
- Cater Puller: This unit is used to pull pipe and equipped with specially designed rubber pulling belts. Adjustable gap device is equipped to adjust the gap between two belts. DC motor of 2 HP capacities is coupled through a suitable reduction gear box to drive the belts
Product Specification of Pvc Braided Hose Pipe Plant With Pipe Cutter
- Die size:15 to 32, 19 to 45, 32 to 75
- Electrical Load:Vacuum Pump: 1.5, 2.2, 3.7
Catter Puler Motor: 1.5, 1.5, 2.2
Total Electrical Load Required for Plant: 22.0, 26.5, 37.2
- Heating Load:On Barrel: 6, 8, 11
On Die: 3, 3.5, 5
Of Cooling Blowers on Barrel: 0.3
(Electrical Heating Load)
- L/D Ratio:22 : 1
- Main Motor:7.5, 11, 15
- Model:SEP050, SEP065, SEP075
- Production Hour:30, 50, 80
- Production Size:15 to 32, 19 to 45, 32 to 75
- Screw Diameter:50, 65, 75
- Space Required:For Plant: 6.5 x 3 x 2.5, 6.5 x 3 x 2.5, 8 x 3 x 2.5 (L x W x H)
- Thickness:0.2 to 2, 0.3 to 3, 0.5 to 5