www.jimtrade.com
Menu

Co-Rotating Twin Screw Extruder With Segmented Barrel

Co-Rotating Twin Screw Extruder With Segmented Barrel

Product Category :    Twin Screw Extruders

Supplier                :    Spark Engineering

Inquire Now
Product Profile of Co-Rotating Twin Screw Extruder With Segmented Barrel

Spark Engineering supplies Co-Rotating Twin Screw Extruder with Segmented Barrel. Spark Engineering offers various types of pipe and profile plant, Sheet Plant, granulation plant, Non Toxic Tubing Plant, High Speed Mixer, and PVC braided hose pipe plant etc. Co-Rotating Twin Screw Extruder with Segmented Barrel is available with barrel cooling system in which Barrel is cooled by water and composed by modular sectors. Each modular has different types of holes for fit together barrel sectors and water cooling. The inlet and outlets of each modular are connected the relative delivery and return, Individual pumps are used for the control of water circulation and controlled by panel.

Co-Rotating Twin Screw Extruder with Segmented Barrel is available with:

  • Segmented Barrel: Barrel segments are from rectangular shaped. Barrel is made from alloy steel and nitride hardened and precisely honed to fine inner surface. The character 8 shaped barrel bore provide helical material transport and continuous material transfer so one can get higher output from their intermeshing twin screw extruder. Water circulation system is provided with every modular of barrel. Each barrel sector has housing for the probe for the working temperature control and measurement
  • Gearbox: The gearbox is specially designed for intermeshing, co-rotating twin screw extruder. The gearbox is of our own design and manufacture. The gearbox is divided in to four parts due to get good accuracy and long life features. Our good sense of bearing selection increases the life of gearbox. Shaft, gear and bearings are assembled in each zone of gearbox. The gearbox is cooled and lubricated by a motor and oil pump. The heat exchanger is also providing for cooling of oil
  • Barrel Cooling System: Barrel is cooled by water and composed by modular sectors. Each modular has different types of holes for fit together barrel sectors and water cooling. The inlet and outlets of each modular are connected the relative delivery and return, Individual pumps are used for the control of water circulation and controlled by panel.
Product Specification of Co-Rotating Twin Screw Extruder With Segmented Barrel
  • Screw Diameter:40, 53, 63
  • Screw Speed:50 - 400, 60 - 300, 50 - 300
  • Output:50, 140, 250 (Expected)
  • Type:40MM PLANT, 53MM PLANT, 63MM PLANT
  • L/D Ratio:40:1
  • No. of Lobes:2
  • Type of Cooling:Water
  • Cooling:Cooling Through Solinoil Valve: 0.25, 0.5, 0.25
  • Lubricant Pump:0.5
  • Barrel Section Length:150, 180, 210
  • Barrel Heating Power:6, 9, 12
  • No. of Heating Zone:7, 10, 10
  • No. of Cooling Zones:7, 10, 10
  • Main Motor:20, 30, 50
Recently Updated Products



Single/ Twin Screw Axial Extruder
Single/ Twin Screw Axial Extruder
Supplier    :    Technoserve Engineers
Inquire Now
Pvc Profile Twin Screw Extruder
Pvc Profile Twin Screw Extruder
Supplier    :    Glasswin Engineering
Inquire Now
Industrial Grade Twin Screw Extruder
Industrial Grade Twin Screw Extruder
Supplier    :    Acts Engineering
Inquire Now
Metal Made Twin Screw Extruder
Metal Made Twin Screw Extruder
Supplier    :    Kolhatkar Engineering
Inquire Now
Compounding Twin Screw Extruder
Compounding Twin Screw Extruder
Supplier    :    Prathamesh Industries
Inquire Now