Product Profile of Silicon Coated Wire Wound Resistor
Enapros manufactures Silicon Coated Wire Wound Resistor. Enapros offers braking resistor, neutral grounding resistor, aluminium housed resistor, metal clad braking resistor and wire grid resistor. The Silicon Coated Wire Wound Resistor is wound with Copper Nickel or Nickel Chromium wire on ceramic tube and is widely used in industrial applications. The Silicon Coated Wire Wound Resistor is suitable for use as loading resistors, braking resistor and capacitor discharge.
Key Features of Silicon Coated Wire Wound Resistor
- Strong Terminals
- Resistance Value unchanged after long term use.
- Multi-terminal Types or adjustable types available.
- Non-inductive type available.
- Mounting hardware for all resistors available.
- Coated with high temperature non-flammable silicone coating.
- Operating Temperature: -55°C to +250°C
- Dielectric Strength: AC1000V for 1 min
- Temperature Coefficient: 50 ppm/° C, 100 ppm/° C, 260 ppm/° C
- Short Time Over Load: 10 X Wattage Rating, 5 sec
- Moisture resistance: temp 40° C moisture 95% DC100v500h
- Thermal Shock: Wattage Rating 30min. -25° C, 15min
- Vibration: 10c/c ~ 50 c/s ~ 10 c/s [1min] -2h each of paralleled and right angle.
- Load Life: Wattage Rating 1.5 h On, 30min off, 1000h
- Derate to zero: Above 250° C
Product Specification of Silicon Coated Wire Wound Resistor
- Derate to zero:Above 250° C
- Dielectric Strength:AC1000V for 1 min
- Load Life:Wattage Rating 1.5 h On, 30min off, 1000h
- Moisture Resistance:temp 40° C moisture 95% DC100v500h
- Operating Temperature:-55°C to +250°C
- Temperature Coefficient:50 ppm/° C, 100 ppm/° C, 260 ppm/° C
- Thermal Shock:Wattage Rating 30min. -25° C, 15min
- Vibration:10c/c ~ 50 c/s ~ 10 c/s (1min) -2h each of paralleled and right angle.
