Product Profile of Impact Test Apparatus

SCR Elektroniks manufactures Impact Test Apparatus. Impact Test Apparatus is used to test the Electrical Accessories / appliances for their mechanical strength. Compliance is checked by applying blows to the sample, by means of the impact test apparatus.

SCR Elektroniks are certified as an ISO 9001:2008 company. SCR Elektroniks manufactures Customized Electrical Test Equipments & Compliance Verification Benches for electrical products.


Impact Test Apparatus comes with the following salient features:

• Striking Element: It has a hemispherical face of radius 10 mm, made of Teflon, weighing 0.15kg.

• Steel Tube: It has external diameter - 9mm, and thickness - 0.5mm. Steel tube is pivoted at its upper end in such a way that it swings only in the vertical plane of the axis of the striking element. The design of the impact test apparatus is such that a force between 1.0N & 2.0N is applied to the face of the hammer to maintain the pendulum in horizontal position. Striking Element is rigidly fixed to the lower end of the steel tube.

• The appliance is held against a solid wall and the test apparatus is so arranged that the pivot of the pendulum is vertically above the point of impact of the hammer. The striking element is then allowed to fall from such a height of 250mm. Three such blows are applied to every part of the enclosure which is likely to be weak, including handle, levers and the like, but excluding single lamps and their covers if these do not protrude from the enclosure by more than 3mm or have a surface not exceeding 3cm [square].