Product Profile of Push to Read Gauge Isolator Valve

Hyloc Hydrotechnic Pvt. Ltd. Offers Push to Read Gauge Isolator Valve. Hyloc Hydrotechnic Pvt. Ltd. Is an ISO 9001:2008 and ISO 14001:2004 registered organisation. The Push to Read Gauge Isolator Valve is used meant for checking the system pressure to which it is connected. The Read Gauge Isolator Valve is a spool type, spring off-set, manually operated device. In normal condition the valve blocks the pressure port and keeps the pressure gauge connected to the drain. Thus isolating the gauge from system pressure surges and eliminating continuous pressure strain on the gauge. By pushing the actuator knob of the valve, system pressure can be read on the gauge. The valve is available either for Mounting: on a sub-plate or with threaded ports. The pressure gauge can either be directly mounted on the valve or can be Connected remotely.

Technical Specifications of Read Gauge Isolator Valve are:

• Construction: Spool type, manually operated, spring off-set.

• Mounting: Sub-plate mounting, conforming to IS 10187, ISO 4401 - AB - 03 - 4 - A, DIN 24340 [Only `A` and `B` ports used.]

• Mounting: position Optional

• Flow direction as indicated by the hydraulic symbol.

• Operating pressure: 210 bar.

• Hydraulic medium: Mineral oil.

• Viscosity range: 10 cSt to 380 cSt.

• Fluid temperature range: -10 Degree C to +80 Degree C.

• Fluid cleanliness: requirement As per ISO 19/16 or better.