Product Profile of Metallised Polypropylene Film Capacitors With Discharge Resistor
Solid State Systems Private Limited supplies Metallised Polypropylene Film Capacitors with Discharge Resistor. Solid State Systems Private Limited is an ISO 9001:2000 certified company. Metallised Polypropylene Film Capacitors with Discharge Resistor is encapsulated in plastic containers using polyurethane resin. Metallised Polypropylene Film Capacitors with Discharge Resistor capacitors are designed for use in Motor run as well as lighting application. This capacitor is provided with a fail-safe device conforming to UL810. It is necessary to provide a space of 10 mm above the capacitor element to allow the fail-safe device to operate. The capacitors do not contain any ecologically hazardous material. It is available in the brand name of Series P-100 [A].
Key Features of Metallised Polypropylene Film Capacitors With Discharge Resistor
- Self - healing properties
- High Insulation Resistance
- Low dissipation factor
- Capacitance Range: 1.0 µF - 80.0 µF
- Rated Tolerance: ± 5%
- Rated Voltage: 250 V, 300 V, 350 V, 370 V, 400 V, 440 V, 450 V, 500 V AC
- Rated Frequency: 50 / 60 Hz
- Climatic Category: - 25 degree centigrade ~ + 85 degree centigrade
- Ref. Standards: IEC 252 / 1048 & IS 2993
Product Specification of Metallised Polypropylene Film Capacitors With Discharge Resistor
- Applicable Standard:IEC 252 / 1048 & IS 2993
- Capacitance:1.0 µF – 80.0 µF
- Casing:Plastic
- Dielectric Strength:Zn-Al Alloy Metallised Polypropylene
- Rated Frequency:50 / 60
- Rated Voltage:250 V, 300 V, 350 V, 370 V, 400 V, 440 V, 450 V, 500 V AC
- Tolerance:±5%
