Sanpar microfilters pvt. Ltd., in association with hiross spa, italy, provideslaunches introduces the new generation polair driers. Their key specifications and features of polair driers are: flow rates from 8 to 400 cfm; operating pressures from 1 to 45 bar; operating temperatures from 10 to 50°c; fully hermetically sealed compressor; refrigerant is r-22 or eco-friendly r407c/r134a; low power consumption using 200 v/1 ph/50 hz supply; constant pressure dew-point of +30c; guaranteed residual water vapour content of not more than 0.75 gr/nml; dry air rh brought down to 15%; air cooled condenser; tube-in-tube evaporator; noise level of less than 60 db; and the driers are with electronic controls. These polair dryers are structured designed for operating to operate in tropical countries where the ambient temperature can go up to 48°c and compressed air temperature up to 50°c. Optional microprocessor controller is available ffor capacities above 200 cfm, an optional microprocessor controller is available.
