Product Profile of Tig / Mig 120 Si [lh-alloy Wires & Rods]

Ador fontech limited is engaged in supplying products & services to industries like steel, mining, power plants, railways, road transport workshops, sugar mills, cement plants, fertilizer & chemical plants, workshops, shipping industries etc. They manufacture the lh-alloy wires & rods. Tig/mig saw 120 si is a fully austenitic stainless steel filler rod. Its salient features are:

• The tig / mig 120 si has an alloy basis of cr, ni & si

• It has a uts of 39 kgf/mm & elongation of 35%

• Its chemical composition is of c,ni,cr,mo,mn,si,p,s & cu

• The 120h has a uns no. Of s30888

• The tig / mig 120 si has high silicon content.

• Improves the usability of the filler metal in the gas metal arc welding process.

• If the dilution by the base metal produces a low ferrite or fully austenitic weld, the crack sensitivity of the weld is somewhat higher than that of lower silicon content weld metal.

• Exhibits impact energy of 120 j & a hardness of 160.

Suitable for joining stainless steels of the 18cr/8ni elc-type and 18cr/8ni/nb type for 0 service temperatures up to 350 c stainless cr-steels except in sulphur rich environments.