www.jimtrade.com
Menu

General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive

General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive

Product Category :    Adhesives

Supplier                :    Acro Paints Limited

Inquire Now
Product Profile of General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive

Acro Paints Ltd. Manufactures General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive. Acro Paints Ltd. Is an ISO 9001:2008 and ISO 9002 certified company. The General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive of model name Acrotile - GP is a single pack polymer based cementitious general purpose tile adhesive. It could be used as a thin or thick bed adhesive for fixing ceramic, mosaic, marble, granite, wall and floor tiles.

Advantages of General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive are:

  • Good water-resistant.
  • Excellent adhesion strength on concrete and plastered surfaces.
  • Tile fixing - permanent.
  • Chloride free.
  • Non-toxic, suitable for drinking water contact.
  • Most economical and best performance levels among all conventional pasty type adhesive.
  • As the applied material shall be covered by tile no curing is required.

  • Applications of General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive are:
  • Bonding ceramic wall tiles and mosaic tiles for exterior and interior floors and walls in bathrooms, toilets, shower recesses, laundries, and swimming pools can be most suitably applied over rendered brick work, brick masonry and concrete surfaces.

  • Properties of General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive are:
  • Appearance : Grey Powder
  • Colour: Mixed material generally grey but other colours are available on request.
  • Mixing Ratio: Approximately, 3-4 parts [by wt.] powder shall be mixed with 1 part of water depending on the climatic and working conditions.
  • Coverage: Around 2.5 to 3 kg powder material is required to cover 1 m2 area with 3mm thickness when applied by notched trowel.
  • Working time : 1-2 hours
  • Curing As the applied material shall be covered by tiles no curing is required.
Product Specification of General Purpose Single Pack Polymer Modified Cementitious Tile Adhesive
  • Appearance:Grey Powder
  • Colour:Mixed material generally grey but other colours are available on request.
  • Coverage:Around 2.5 to 3 kg powder material is required to cover 1 m2 area with 3mm thickness when applied by notched trowel.
  • Mixing ratio:Approx 3-4 parts (by wt.) powder shall be mixed with 1 part of water depending on the climatic and working conditions.
Recently Updated Products



Cement based Polymer Adhesive
Cement based Polymer Adhesive
Supplier    :    Evershine Build India Pvt Ltd.
Inquire Now
Industrial Purpose High Strength Adhesive
Industrial Purpose High Strength Adhesive
Supplier    :    Champion Advanced Materials Pvt. Ltd.
Inquire Now
Self Adhesive Jumbo Roll
Self Adhesive Jumbo Roll
Supplier    :    Entek Corporation
Inquire Now
Synthetic Resin Adhesive for Flooring and Covering
Synthetic Resin Adhesive for Flooring and Covering
Supplier    :    Mapei India Ltd
Inquire Now
Two Component Epoxy Adhesive
Two Component Epoxy Adhesive
Supplier    :    Mapei India Ltd
Inquire Now